OASE Aquarius E Fountain Pumps

Aquarius 4000E to 7000E

This Aquarius E  fountain pump has very high capacities displacement that is controlled electronically of a synchronous motor.

OASE Aquarius E features are:

  • 10 mm thick oxide ceramic shaft with permanent magnet and the DFI impeller.
  • Stainless steel earthing plates and a electronic overload circuit that offers optimal safety.
  •  The OASE Aquarius E is simple to clean and has a long life service.
  • Enables infinite flow rate adjustment with a controller on the pump's suction duct.
  • After removing the filter, the Aquarius E fountain pump can be connected to an external pre-filter.
  • Included with this Aquarius E pump is an adjustable 1" swivel ball joint with a hose diameter connection of about 3/4" to 1 1/2"
OASE Aquarius E Aquarius 4000E Aquarius 5000E Aquarius 7000E
Dimensions in mm (LxWxH

234 x 150 x 175
Power consumption (watt) 55 80 125
Turnover rate max. (l/min) 65 80 120
Head of water max. (m) 3.2 3.8 4.5

Note that all OASE Aquarius E have a rated voltage of 220-240 V/50 Hz, 1 pressure side threaded connection, a 3"/4"  to 1" connection for hoses,34 mm suction side connection. The filter surface for each Aquarius pump is 1150 cm2  the pumps have a weight of 3 kg for a cable length of 10 m.

OASE Aquarius E-S Fountain Pumps

Seawater resistant

Seawater resistant are tested also suitable for dependable implementation, and function in high-saline water. The secret about this OASE Aquarius E-S is the Double Floaded Impeller (DFI) system which makes the pump to have high performance, axial-load free operation.

  • When using the OASE Aquarius E-S, continuous operation characteristics are not effected.
  • Aquarius E-S pumps have special pedestal with rubber pads that offer silent operation.
  • Hose connection on the pressure and suction ducts enables the OASE Aquarius pump to operate out of water.
  • This Aquarius E-S comes equipped with a thermal cut off switch and a 3m cable.